Development of an Epoxy/Carbon Fiber Composite for Radiation Attenuation with a Dispersion of Micro Particles of Bismuth Trioxide (Bi2O3)

PEDRO MARCIO MUNHOZ; FERNANDO CODELO NASCIMENTO; ORLANDO RODRIGUES JUNIOR; MARIA DA PENHA ALBUQUEQUE  PONTIES; WILSON APARECIDO PAREJO CALVO

doi:10.15392/2319-0612.2024.2728

Autores/as

PEDRO MARCIO MUNHOZ Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil.
FERNANDO CODELO NASCIMENTO Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil.
ORLANDO RODRIGUES JUNIOR Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil.
MARIA DA PENHA ALBUQUEQUE PONTIES Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil.
WILSON APARECIDO PAREJO CALVO Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil.

DOI:

https://doi.org/10.15392/2319-0612.2024.2728

Palabras clave:

composite, bismuth (III) oxide, X – rays, radiation attenuation

Resumen

The objective of this research was the development of an epoxy/carbon fiber composite with bismuth trioxide (Bi2O3) dispersion in the polymeric matrix for application as a low-energy photon barrier and to determine the mass attenuation coefficient of this composite. Quantitative and experimental methodology was used for this research. The mass ratios of the bismuth oxide in the composite were approximately 0.1, 0.2, 0.3 and 0.4. The Pantak/Seifert irradiator model Isovolt HS 160 was used as an X-radiation source. The photon energies were 48, 65, 82 and 118 keV, with radiation doses of 471, 1912, 92.6 and 74.2x10-3 mGy.min-1 respectively, with energies and radiation doses being typical of X-ray diagnostic radiography. At an energy of 118 keV, the dispersion of Bi2O3 in the polymeric matrix increased the mass attenuation coefficient from 0.15 cm2.g-1 (without dispersion) to 1.28 cm2.g-1 (39.13% by mass of Bi2O3). This is an increase of approximately 753%. At an energy of 82 keV, the percentage increase was approximately 582%. At an energy of 65 keV, there was an increase of 739% and for photons with an energy of 48 keV the percentage increase in the mass attenuation coefficient was 1262%. In conclusion, a composite epoxy/carbon fiber with bismuth oxide dispersion is an excellent option as compared to a lead plate. The composite studied can attenuate photon energy and does not present an acute or chronic danger to the environment or to health. Also, it is non-carcinogenic and does not cause reproductive toxicity, both being clear advantages over lead. Finally, it should be noted that composite applications could be radiological shields for the X-ray, aerospace industries, among others.

Descargas

Los datos de descarga aún no están disponibles.

Referencias

[1] Maghrabi, H. A., Vijayan, A., Deb, P. and Wang, L. Bismuth oxide-coated fabrics for X-ray shielding, Textile Research Journal 86(6), 649–658 (2016).

[2] UNIVERSIDADE FEDERAL DO PARÁ. ESPECTROSCOPIA DE RAIOS-X, 2024, <http://fisica.ufpr.br/grad/espectroscopia_rx.pdf> (4 June 2024 ).

[3] Nambiar, S., Osei, E. K. and Yeow, J. T. W. Polymer nanocomposite‐based shielding against diagnostic X‐rays, J of Applied Polymer Sci 127(6), 4939–4946 (2013).

[4] Akman, F., Kaçal, M. R., Almousa, N., Sayyed, M. I. and Polat, H. Gamma-ray attenuation parameters for polymer composites reinforced with BaTiO3 and CaWO4 compounds, Progress in nuclear energy 121, 103257 (2020).

[5] Cao, D., Yang, G., Bourham, M. and Moneghan, D. Gamma radiation shielding properties of poly (methyl methacrylate)/Bi2O3 composites, Nuclear Engineering and Technology 52(11), 2613–2619 (2020).

[6] Ambika, M. R., Nagaiah, N. and Suman, S. K. Role of bismuth oxide as a reinforcer on gamma shielding ability of unsaturated polyester based polymer composites, J of Applied Polymer Sci 134(13), app.44657 (2017).

[7] Chen, S., Nambiar, S., Li, Z., Osei, E., Darko, J., Zheng, W., Sun, Z., Liu, P. and Yeow, J. T. Bismuth oxide-based nanocomposite for high-energy electron radiation shielding, Journal of materials science 54(4), 3023–3034 (2019).

[8] Tijani, S. A. and Al-Hadeethi, Y. The use of isophthalic-bismuth polymer composites as radiation shielding barriers in nuclear medicine, Materials Research Express 6(5), 055323 (2019).

[9] MUNHOZ, P. M., NASCIMENTO, F. C., SILVA, L. G., GARY, B. C. and CALVO, W. A. Simulation of radiation attenuation in polymer matrix composite with epoxy resin, reinforced with carbon fiber and dispersion of bismuth oxide (Bi2O3) nanoparticles, presented at 6th Brazilian Conference on Composite Materials, 2022, Tiradentes, Universidade Federal de São João del-Rei.

[10] ASTM - American Society for Testing and Materials. ASTM. 3039/D 3039M–95a. Standard Test Method for Tensile Properties of Polymer Matrix Composite, 2017, ASTM International (2017).

[11] MUNHOZ, P. M., NASCIMENTO, F. C., CALVO, W. A. and IPEN/CNEN. Material Compósito com Efeito de Blindagem contra Radiação Ionizante, método de Fabricação e Uso, Patent BR 10 2023 017684-4.

[12] ABNT - Associação Brasileira de Normas Técnicas. ABNT NBR IEC 61331-1:2018- Dispositivo de proteção contra a radiação X para fins de diagnóstico médico - Parte 1: Determinação das propriedades de atenuação de materiais., ABNT - Associação Brasileira de Normas Técnicas (2018).

[13] Vivolo, V. Desenvolvimento de um sistema de referência para determinação do equivalente de dose pessoal e da constância de feixes de radiação X, PhD Thesis. USP – Universidade de São Paulo (2006).