Evaluation of polybutadiene rubbers using FTIR spectra
DOI:
https://doi.org/10.15392/bjrs.v5i2.198Palavras-chave:
radiation, dosimetry, detectorsResumo
Radiation dosimetry for medical and industrial purposes has increasingly evolved over the last few decades with the introduction of various new detectors. Depending on the properties exhibited for radiation dosimetry, some detectors present their applications in a specific area. From a physics point of view, an ideal dosimeter should be able to measure absorbed dose. In this work, synthetic materials based on polybutadiene rubbers (PBR) were proposed as a new class of radiation detectors. The influence of radiation dose on their properties has been investigated for application in radiation dosimetry. The rubber samples were exposed to absorbed doses from 10 Gy up to 250 Gy, using a 60Co Gamma Cell-220 system. Their responses were carried out with a Fourier Transform Infrared (FTIR) Spectrometer to investigate the presence of absorbance peaks. The results suggested the existence of a relationship between the absorbed doses and the absorbance peaks associated with stretching (1300-1200 cm-1), deformation (1450-1340 cm-1) and vibration (1500-1400 cm-1) processes in the material.
Downloads
Referências
CHMIELEWSKI, A.G.; HAJI-SAEID, M.; AHMED, S.. Progress in radiation processing of polymers. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, v. 236, n. 1, p. 44-54, 2005.
MCKEEN, L.W. “Plastics used in medical devices," in Handbook of polymer applications in medicine and medical devices. Elsevier US, Philadelphia, 2014.
MANSHAIE, R.; KHORASANI, S.N.; VESHARE, S.J.; ABADCHI, M.R. Effect of electron beam irradiation on the properties of natural rubber (nr)/styrene butadiene rubber (sbr) blend. Radiation Physics and Chemistry, v. 80, n. 1, p. 100-106, 2011.
ABADCHI, M.R.; JALALI-ARANI, A. The use of gamma irradiation in preparation of polybutadiene rubber nanopowder; its effect on particle size, morphology and crosslink structure of the powder. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, v.320, n.1, p.1-5, 2014.
ABIONA, A.A.; OSINKOLU, A.G. Gamma-irradiation induced property modification of polypropylene. International Journal of Physical Sciences, v. 5, n.7, p.960-967, 2010.
INTERNATIONAL ATOMIC ENERGY AGENCY (IAEA). Dosimetry for Radiation Pro-cessing. Viena, Austria. 2000.
OLIVEIRA, L.M.; ARAUJO, P.L.B.; ARAUJO, E.S. The effect of gamma radiation on mechanical properties of biodegradable polymers poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate). Materials Research, v. 16, n.1, p. 195-203, 2013.
ZHANG, Y.; ZHAO, S.F.; LI, Y.T.; XIE, L.D.; SHENG, K.L. Radiation effect on styrene-butadiene-styrene copolymer. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, v. 266, n.1, p. 3431 3436, 2008.
LAL, J.; MARK, J.E. Advances in Elastomers and Rubber Elasticity. Springer US, New York. 1986.
PROKOF'EVA, N.I.; SHVARTSBERG, G.I.; SPERANTOVA, I.B. Calculation of the infra-red spectrum of 1,4-trans-polybutadiene. Journal of Applied Spectroscopy, v. 27, n.3, p. 1185-1188, 1977.
Downloads
Publicado
Edição
Seção
Licença
Declaro que o presente artigo é original, não tendo sido submetido à publicação em qualquer outro periódico nacional ou internacional, quer seja em parte ou em sua totalidade. Declaro, ainda, que uma vez publicado na revista Brazilian Journal of Radiation Sciences, editada pela Sociedade Brasileira de Proteção Radiológica, o mesmo jamais será submetido por mim ou por qualquer um dos demais co-autores a qualquer outro periódico. Através deste instrumento, em meu nome e em nome dos demais co-autores, porventura existentes, cedo os direitos autorais do referido artigo à Sociedade Brasileira de Proteção Radiológica, que está autorizada a publicá-lo em meio impresso, digital, ou outro existente, sem retribuição financeira para os autores.
Licença
Os artigos do BJRS são licenciados sob uma Creative Commons Atribuição 4.0 Licença Internacional, que permite o uso, compartilhamento, adaptação, distribuição e reprodução em qualquer meio ou formato, desde que você dê o devido crédito ao (s) autor (es) original (is) e à fonte, forneça um link para a licença Creative Commons, e indique se mudanças foram feitas. As imagens ou outro material de terceiros neste artigo estão incluídos na licença Creative Commons do artigo, a menos que indicado de outra forma em uma linha de crédito para o material. Se o material não estiver incluído no licença Creative Commons do artigo e seu uso pretendido não é permitido por regulamentação legal ou excede o uso permitido, você precisará obter permissão diretamente do detentor dos direitos autorais. Para visualizar uma cópia desta licença, visite http://creativecommons.org/licenses/by/4.0/