Numerical and experimental investigation of the water flow through PWR spacer grids
DOI:
https://doi.org/10.15392/bjrs.v8i3A.1294Palabras clave:
Spacer grids, LDV, CFD, Thermo-hydraulic, PWRResumen
Spacer grids are one of main components of a Pressurized Water Reactor (PWR) fuel assembly. They are able to improve heat transfer from rod bundles to the water flow by increasing turbulence and mixture of this flow. On the other hand the pressure drop increases because spacer grids. Experimental and Computational Fluid Dynamics (CFD) analysis have been used to understand how spacer grids affect the water flow. This analysis is important to improve spacer grids thermal-hydraulic performance. This paper aims to investigate numerically and experimentally the water flow through PWR spacer grids. The numerical and experimental procedures have been developed for a 5x5 rod bundle with spacer grids at the Nuclear Technology Development Center (CDTN) in Belo Horizonte, Brazil. At CDTN, measurements of the velocity components are acquired with a 2D LDV (Laser Doppler Velocimetry) system and the numerical results are obtained using ANSYS CFX code. The measurements are obtained at one height downstream from a spacer grid and compared to CFD simulations for a flow rate at Reynolds number of 5.4x104 . Results show good agreement between both methodologies. The great repeatability and low experimental uncertainty evaluated (< 1.24%) in this work can be used to validate other CFD codes.Descargas
Referencias
TODREAS, N. E., and KAZIMI, M.S. Nuclear Systems Vol 1: Thermal Hydraulic. Fun- damentals, Ed.CRC Press, New York & United States of America (2012).
CONNER, M. E., “Hydraulic Benchmark Data for PWR Mixing Vane Grid”, Conference Proceedings of the NURETH-14, Toronto, September, Vol. 337, pp. 25–30, (2011).
IN, W. K., et. al., “Experimental Observation and CFD Prediction of Flow Mixing in a Rod Bundle with Mixing-vane Spacer Grid”, 10th Pacific Symposium on Flow Visualization and Image Processing, Naples, June, Vol. 337, pp. 15–18, (2015).
KANG, S. K., and HASSAN, Y. A., “Computational fluid dynamics (CFD) round robin benchmark for a pressurized water reactor (PWR) rod bundle”, Nuclear Engineering and Design, 304, pp. 204–231, (2016).
CHANG, S. K., et. al., “Turbulent mixing in a rod bundle with vaned spacer grids”, Nuclear Engineering and Design, 279, pp. 19–36, (2014).
SANTOS, A. A. C. S., et. al., “Convergence study and uncertainty quantification of average and statistical PIV measurements in a matched refractive index 5x5 rod bundle with mixing vane spacer grid”, Experimental Thermal and Fluid Science, 102, pp. 215–231, (2019).
ANSYS, IC, “CFX-13 Pre Users Guide, Release 13.0”, Canonsburg. ANSYS, 344p. (2012).
ISO 5167-1, “Measurement of fluid flow by means of pressure differential devices”, ISO, Geneva, Switzerland (1991).
NAVARRO, M.A., “Procedimento para calibração dos transmissores de pressão do circuito água-ar (CAA)”, Nota interna CNEN/CDTN (2011).
NAVARRO, M.A., “Procedimento para calibração das linhas de medição de temperatura do circuito água-ar (CAA)”, Nota interna CNEN/CDTN (2012).
BSA Flow Software, “BSA Flow Software Version 4.10 Instalation & Users Guide”, Dantec Dynamics A/S, Denmark (2006).
CASTRO, H. F. P., Investigação Experimental do Escoamento de Água Após Grade Espaçadora de Elemento Combustível Para Reatores Nucleares do Tipo PWR, Dissertação, Programa de Pós Graduação do Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte, Brazil (2016).
ISO GUM, JCGM, “Evaluation of measurement data Guide to the expression of uncer-tainty in measurement”, (2008).
WAGNER.W., et. al., “IAPWS Industrial Formulation 1997 for the Thermodynamic Proper-ties of Water and Steam”, Journal of Engineering for Gas Turbines and Power - ASME, 122, pp. 150–182, (2000).
SANTOS, A. A. C., et. al., “Verification and validation of a PWR rod bundle seg- ment CFD simulation”, The 15th International Topical Meeting on Nuclear Reactor Thermal-hydraulics - NURETH-15, Pisa, May 12-15, (2013).
Descargas
Publicado
Número
Sección
Licencia
Derechos de autor 2021 Brazilian Journal of Radiation Sciences (BJRS)
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Licencia: los artículos de BJRS tienen una licencia internacional Creative Commons Attribution 4.0, que permite el uso, el intercambio, la adaptación, la distribución y la reproducción en cualquier medio o formato, siempre que se otorgue el crédito correspondiente al autor o autores originales y a la fuente, proporcione un enlace a la licencia Creative Commons e indique si se realizaron cambios. Las imágenes u otros materiales de terceros en el artículo están incluidos en la licencia Creative Commons del artículo, a menos que se indique lo contrario en una línea de crédito al material. Si el material no está incluido en la licencia Creative Commons del artículo y su uso previsto no está permitido por la regulación legal o excede el uso permitido, el autor deberá obtener el permiso directamente del titular de los derechos de autor. Para ver una copia de esta licencia, visite http://creativecommons.org/licenses/by/4.0/
