Study of aluminothermic slag leaching for uranium and thorium recovery
DOI:
https://doi.org/10.15392/2319-0612.2022.2002Palabras clave:
uranium oxide, thorium oxide, leachingResumen
The need for energy by modern society is increasing. On the other hand, it is necessary to reduce costs and environmental impact. In this perspective, the recovery of uranium present in industrial waste from the processing of naturally occurring radioactive material (NORM) appears as a possible complement to the mining stage of the Nuclear Fuel Cycle. NORM's uranium recovery can reduce environmental liabilities and mineral processing costs (especially blasting, crushing, and grinding). The industrial residue of this study, a type of aluminothermic slag, comes from the metallurgical processing of columbite (niobium and tantalum mineral) and has a content, measured by X-ray fluorescence, of 1.78% of U3O8. This content is higher, for example than those found in Lagoa Real-BA (0.2% in rock) and Santa Quitéria-CE (0.1% in rock). Another material that will be studied is ThO2, which is also present in the slag with a content, measured by X-ray fluorescence, around 3.66%. The process parameters analyzed were pH of the solution, time, granulometry and percentage of solids. The metallurgical recovery of U3O8 reached a maximum value of 71,3% with pH = 1, time of 8 hours, 65 % percentage of solids, and 200 µm of granulometry. The metallurgical recovery of ThO2 reached a maximum value of 69,7% with pH = 1, time of 8 hours, 65 % percentage of solids, and 200 µm of granulometry.
Descargas
Referencias
WORLD NUCLEAR ASSOCIATION. The Harmony Programme, https://world-nuclear.org/our-association/what-we-do/the-harmony-programme.aspx, 2019.
INDÚSTRIAS NUCLEAREAS DO BRASIL. INB Santa Quitéria – Consórcio Santa Quitéria, http://www.inb.gov.br/A-INB/Onde-estamos/Santa-Quiteria, 2020.
SAP - SYSTEMS, APPLICATIONS AND PRODUCTS IN DATA PROCESSING. SAP SE, Walldorf-Germany, 2017.
PRESIDÊNCIA DA REPÚBLICA – CASA CIVIL. Lei No 10.308, de 20 de Novembro de 2001, Diário Oficial da União, Brasília – Brazil, 2001.
V. V. MOURA, T. O. SANTOS, C. LIMA e P. B., “Study of the Physical Properties of Aluminothermic Slags for the Recovery of Uranium and Thorium,” Anais da 2019 International Nuclear Atlantic Conference - INAC 2019, Santos, 2019.
HABASHI, F. A Textbook of Hidrometallurgy. Saint-Foy: Métallurgie Extractive Québec, Enr., 1993.
C. K. GUPTA. Chemical Metallurgy, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim-Germany, 2003.
IBRAHIM, M. E. et al. Processing of the mineralized Black Mica for the recovery of uranium, rare earth elements, niobium, and tantalum. Hydrometallurgy, Amsterdã, v. 197, novembro 2020. doi.org/10.1016/j.hydromet.2020.105474.
V. S. T. CIMINELLI, Hidrometalurgia, Tendências Parte 2, Belo Horizonte, 2007, pp. 157-174.
DUTRA, I. C.; LEITE, V. D. Influência da granulometria e do pH no processo de dessorção de amônia em torres de recheio. Revista DAE, São Paulo, p. 25-37, janeiro 2015.
MORAIS, C. A.; GOMIERO, L. A.; FILHO, W. S. Leaching of uranium ore from Caetité's facilities, Bahia state, Brazil. In: YOUNG, C. A.; TAYLOR, P. R.; ANDERSON, C. G. Hydrometallurgy 2008: Proceedings of the Sixth International Symposium. 1ª. ed. Englewood-EUA: Society for Mining Metallurgy & Exploration, v. 1, 2008. p. 1119-1132. ISBN: 0873352661.
J. C. B. S. AMARAL e C. A. MORAIS, “Thorium and Uranium extraction from rare Earth elements in monazite sulfuric acid liquor through solvente extraction,” Minerals Engineering, 2010.
BARROS NETO, B.; SCARMINIO, I. S.; BRUNS, R. E. Como Fazer Experimentos - Pesquisa e Desenvolvimento na Ciência e na Indústria. Campinas: Editora da Unicamp, 2001. ISBN 85-268-0544-4.
Descargas
Publicado
Número
Sección
Licencia
Derechos de autor 2022 Brazilian Journal of Radiation Sciences (BJRS)

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Licencia: los artículos de BJRS tienen una licencia internacional Creative Commons Attribution 4.0, que permite el uso, el intercambio, la adaptación, la distribución y la reproducción en cualquier medio o formato, siempre que se otorgue el crédito correspondiente al autor o autores originales y a la fuente, proporcione un enlace a la licencia Creative Commons e indique si se realizaron cambios. Las imágenes u otros materiales de terceros en el artículo están incluidos en la licencia Creative Commons del artículo, a menos que se indique lo contrario en una línea de crédito al material. Si el material no está incluido en la licencia Creative Commons del artículo y su uso previsto no está permitido por la regulación legal o excede el uso permitido, el autor deberá obtener el permiso directamente del titular de los derechos de autor. Para ver una copia de esta licencia, visite http://creativecommons.org/licenses/by/4.0/