Waterproofing pellets for Optically Stimulated Luminescence dosimetry
DOI:
https://doi.org/10.15392/bjrs.v10i2A.2021Palabras clave:
OSL, hygroscopy, dosimetry, humidityResumen
Several doped materials are being studied for dosimetric application, but when some dopant is used with the aim to increase the sensibility, some of these can increases the hygroscopic properties of the sample, which is not suitable for dosimetry. If the material absorbs water during the storage period, it may change their luminescent properties, reducing or completely erasing the signal produced by ionizing radiation. Unlike thermoluminescence, OSL measurements do not need high temperature to read the signal, however, sometimes some assisted temperature or preheating is required. In this work is presented a new low-cost option for performing OSL measurements, even with preheating up to 160 oC. It was tested a transparent enamel for sticking the luminescent powdered samples on aluminum disc and also covering the samples with the enamel avoiding in this way the absorption of humidity from the environment, even the signal decreases, the reproducibility and fading do not depend of their hygroscopic properties.
Descargas
Referencias
ROCCA R.R. Estudo dos centros luminescentes de cristais de quartzo aplicados à datação de sedimentos por Luminescência Opticamente Estimulada. 2012. Tese de doutorado, DOI: 10.11606/T.43.2012.tde-27032013-135335.
MARINI A.; VALENÇA J.V.B. ; OLIVEIRA R.A.P. ; SOUZA S.O. ; CIOLINI R. ; D’ERRICO F. Production and characterization of H3BO3–Li2CO3–K2CO3–MgO glass for dosimetry. Radiation physics and chemistry, v. 116, p. 92-94, 2015.
MOGENSEN M.; THOMSEN J.B. ; SKOVGAARD L.T. ; JEMEC G.B.E. Nail thickness measurements using optical coherence tomography and 20-MHz ultrasonography. Clinical and laboratory investigations, v. 157, p. 894-900, 2007.
CEBALLOS D.M.; YOUNG A.S.; ALLEN J.G.; SPECHT A.J.; NGUYEN V.T.; CRAIG J.A.; MILLER M.; WEBSTER T.F. Exposures in nail salons to trace elements in nail polish from impurities or pigment ingredients - A pilot study. International Journal of Hygiene and Environmental Health, v. 232, p. 113687, 2021
JAHN A. ; SOMMER M. ; HENNIGER J. Environmental dosimetry with the BeOSL personal dosimeter e State of the Art. Radiation measurements, v.71, p. 438-441, 2014.
SOUZA S.O. ; SOUZA D.N. ; BAFFA O. ; D’ERRICO F. Novos materiais dosimétricos para aplicações em física médica. Revista Brasileira de Física Médica, v. 13(1), p. 24-33, 2019.
PERIC Z. ; ADOLPHI E.L. ; STEVENS T. ; ÚJVARI G. ; ZEEDEN C. ; BUYLAERT J. ; MARKOVIC S.B. ; HAMBACH U. ; FISCHER P. ; SCHMIDT C. ; SCHULTE P. ; HUAYU L. ; SHUANGWEN Y. ; LEHMKUHL F. ; OBREHT I. ; VERES D. ; THIEL C. ; FRECHEN M. ; JAIN M. ; VOTT A. ; ZOLLER L. ; GAVRILOV M.B. Quartz OSL dating of late quaternary Chinese and Serbian loess: A cross Eurasian comparison of dust mass accumulation rates. Quaternary International, v. 502, Part A, p. 30-44, 2019.
LIMA J.F. ; NAVARRO M.S.; VALERIO M.E.G. Effects of thermal treatment on the TL emission of natural quartz. Radiation Measurements, v. 35, p. 155-159, 2002.
Descargas
Publicado
Número
Sección
Categorías
Licencia
Derechos de autor 2022 Brazilian Journal of Radiation Sciences (BJRS)

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Licencia: los artículos de BJRS tienen una licencia internacional Creative Commons Attribution 4.0, que permite el uso, el intercambio, la adaptación, la distribución y la reproducción en cualquier medio o formato, siempre que se otorgue el crédito correspondiente al autor o autores originales y a la fuente, proporcione un enlace a la licencia Creative Commons e indique si se realizaron cambios. Las imágenes u otros materiales de terceros en el artículo están incluidos en la licencia Creative Commons del artículo, a menos que se indique lo contrario en una línea de crédito al material. Si el material no está incluido en la licencia Creative Commons del artículo y su uso previsto no está permitido por la regulación legal o excede el uso permitido, el autor deberá obtener el permiso directamente del titular de los derechos de autor. Para ver una copia de esta licencia, visite http://creativecommons.org/licenses/by/4.0/