ISO/IEC 17025 accreditation of radiation measurement test methods in the Brazilian National Commission for Nuclear Energy – Laboratory of Poços de Caldas
DOI:
https://doi.org/10.15392/bjrs.v6i3.361Palabras clave:
quality management system, ISO/IEC 17025, 2005, accreditation, radiation measurement, method validationResumen
This paper describes the implementation process of a Quality Management System (QMS) at the Laboratory of Poços de Caldas (LAPOC) in Brazil, aiming for ISO/IEC 17025 accreditation. Due to the governmental nature of the entity, all accreditation efforts had to be undertaken on a particular legal framework – not usually favorable to QMS requirements. As the scope consisted of both chemical and radiation test methods (for which only a few labs are accredited worldwide), this initiative turned into a complex endeavor for the organization. In this sense, critical aspects on the development of a QMS are emphasized. LAPOC’s approach to achieve accreditation focused on the branches of documentation development and method validation/uncertainty estimation, whose challenges are here discussed. Upon the successful conclusion of its quality assurance project, LAPOC became the national pioneer in the field of accredited radiation measurements. This case study may be inspiring to other public institutions that struggle to obtain accreditation of radioanalytical test methods in an environment of low resources availability and restricted manpower.
Descargas
Referencias
International Organization for Standardization/International Electrotechnical Commission. ISO/IEC 17025:2005 - General requirements for the competence of testing and calibration laboratories. Geneva: International Organization for Standardization, Geneva, 2005. 30 p.
Gitlow, H.S. Quality management systems: a practical guide. Boca Raton: CRC Press, 2001
Albano F.M.; Faustini L.H. The influence of a quality system according to ISO/IEC 17025 on the performance of Brazilian laboratories in proficiency testing in the environmental area. Accred Qual Assur, v. 21, p. 19-23, 2016
International Atomic Energy Agency. Quality system implementation for nuclear analytical techniques. IAEA-TCS-24. Vienna: IAEA, 2004. 91p.
Jerome S.M.; Judge S.M. Accreditation to ISO 17025:2005 for the Radioactivity Metrology Group of the UK’s National Physical Laboratory. Journal of Radioanalytical and Nuclear Chemistry, v. 273, p. 353-355, 2008
INMETRO. DOQ-CGCRE-008 rev. 05 - Orientação sobre validação de métodos analíticos. Rio de Janeiro: INMETRO, 2016. 20p. Available at: <http://www.inmetro.gov.br/credenciamento/organismos/doc_organismos.asp?tOrganismo=CalibEnsaios>Last accessed: 31 Oct. 2017
BIPM, IEC, IFCC, ISO, IUPAC, IUPAP and OIML. Evaluation of measurement data—guide to the expression of uncertainty in measurement JCGM 100:2008. BIPM: Se`vres, 1995. 120 p. Available at: <http://www.bipm.org/en/publications/guides/gum.html>. Last accessed: 31 Oct. 2017
Kragten J. Calculating standard deviations and confidence intervals with a universally applicable spreadsheet technique. Analyst,. v. 119, p. 2161-2166, 1994
Olivares I.R.B.; Lopes F.A. Essential steps to providing reliable results using the Analytical Quality Assurance Cycle. TrAC Trends in Analytical Chemistry, v. 35, p. 109–121, 2012
Vajda N.; Balla M.; Molnar Z.; Bodizs D. On the way to formal accreditation. Accred Qual Assur, v. 10, p. 599–602, 2006
Resnizky S.M.; Pl´a R.R.; Jasan R.C.; Hevia S.E.; Moreno M.A.; Invenizzi R. The experience of accreditation of an analytical laboratory at the Argentine Atomic Energy Commission. Accred Qual Assur, v. 10, p. 590–593, 2006
Chung K.H.; Choi G.S.; Lee W.; Cho Y.H.; Lee C.W. Implementation of ISO/IEC 17025 standard in a nuclear analytical laboratory: the KAERI experience. Accred Qual Assur, v. 10, p. 603–605, 2006
Zapata-García D.; Llauradó M.; Rauret G. Experience of implementing ISO 17025 for the accreditation of a university testing laboratory. Accred Qual Assur, v. 12, p. 317–322, 2007.
Lopes I.; Santos L.; Pereira M.F.; Vaz P.; Alves J.G. Implementation of the quality management system at the Laboratory of Radiological Protection and Safety (LPSR) in Portugal. Accred Qual Assur, v. 19, p. 355–360, 2014
INMETRO. LAPOC Accreditation Scope. Rio de Janeiro: INMETRO, 2017. 4p. Available at: <http://www.inmetro.gov.br/laboratorios/rble/docs/CRL1225.pdf>. Last accessed: 31 Oct. 2017
Descargas
Publicado
Número
Sección
Licencia
Derechos de autor 2021 Brazilian Journal of Radiation Sciences (BJRS)

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Licencia: los artículos de BJRS tienen una licencia internacional Creative Commons Attribution 4.0, que permite el uso, el intercambio, la adaptación, la distribución y la reproducción en cualquier medio o formato, siempre que se otorgue el crédito correspondiente al autor o autores originales y a la fuente, proporcione un enlace a la licencia Creative Commons e indique si se realizaron cambios. Las imágenes u otros materiales de terceros en el artículo están incluidos en la licencia Creative Commons del artículo, a menos que se indique lo contrario en una línea de crédito al material. Si el material no está incluido en la licencia Creative Commons del artículo y su uso previsto no está permitido por la regulación legal o excede el uso permitido, el autor deberá obtener el permiso directamente del titular de los derechos de autor. Para ver una copia de esta licencia, visite http://creativecommons.org/licenses/by/4.0/