Thermal-hydraulics validation of CFD code for light water nuclear reactors against benchmark experimental results
DOI:
https://doi.org/10.15392/bjrs.v9i2B.1403Palavras-chave:
Benchmark, CFD, subchannel, fuel rod, validationResumo
The cooling of a nuclear reactor depends on a suitable fluid flow pattern among its fuel elements aiming the removal of heat produced in the fuel. In case of light water reactors, an excess of heat drives the fluid to change its phase from liquid to vapor, significantly reducing its capacity to remove heat and leading the reactor to a Loss of Coolant Accident. Numerical simulations using a CFD code is a suitable tool to address this kind of problem and explore the conditions that should be avoided during the reactor operation. The commercial CFD codes had proven to be reliable to simulate with a high accuracy and confidence the thermal-hydraulics of a sort of equipment and systems, avoiding spending efforts and financial resources in the development of new codes that, essentially, perform the same tasks. Despite of it, the CFD codes must be validated, such as against experimental results. To comply with this objective, a benchmark fuel element was purposed and experimentally essayed to provide experimental results for CFD codes calibration. The results of this essay are provided to the four types of subchannels for a 5x5 PWR fuel element, with results provided as density and void fraction. This work presentes the preliminary results obtained with CFD numerical simulations using the ANSYS-CFX® code for the central subchannel with active rods for stead state operation. The results demonstrated that the ANSYS-CFX® is adequate to simulate with high accuracy the flow in this subchannel.
Downloads
Referências
D’AURIA, F. Priorization of nuclear thermal-hydraulics researches. Nuclear Engineering and Design, v.340, p.105-111, 2018.
MESQUITA, A.M.; RODRIGUES, R. R. Detection of the Departure from Nucleate Boiling in Nuclear Fuel Rods Simulators. International Journal of Nuclear Energy, v.2013, Article ID 950129, 7 pages, 2013.
LUTSANYCH, S.; MORETTI, F.; D’AURIA, F.; Validation of NEPTUNE CFD two-phase flow models against OECD/NRC PSBT subchannel experiments. Nuclear Engineering and Design, v.321, p.82-91, 2017.
NEA – NUCLEAR ENERGY AGENCY; OECD/NRC benchmark based on NUPEC PWR sub-channel and Bundle test (PSBT), Volume 1: Experimental Database and Final Problem Specifications. Report. OECD/NEA, Vol. 1, 2012.
PEÑA, C.; PELLACANI, F.; CHIVA, S.; BARRACHINA, T.; MIRÓ, R.; JUAN, R.M.; CFD-Neutronic coupled calculation of a quarter of a simplified PWR fuel assembly including spacer pressure drop and turbulence enhancement. In: Proceedings of INAC 2011, ABEN, Belo Horizonte, Brasil, Oct. 24-28, 2011.
NEA – NUCLEAR ENERGY AGENCY; International benchmark on Pressurized Water Reactor Sub-channel and Bundle Tests, Volume 2: Benchmark results of phase I – Void distribution. Report. OECD/NEA, Vol. 2, 2016.
ANSYS Free Student Software Downloads. ANSYS. Available: https://www.ansys.com/academic/free-student-products. Last accessed: 2019.
KREPPER, E.; RZEHAK, R.; CFD Analysis of a Void Distribution Benchmark of NUPEC PSBT Tests: Model Calibration and Influence of Turbulence Modeling. Science and Technology of Nuclear Installations, v. 2012, Article ID 939561, 10 pages, 2012.
IN, W.K.; SHIN, C.H.; LEE, C.Y.; CFD simulation of subcooled boiling flow in nuclear fuel bundle. In: Proceedings of Seventh International Conference on Computational Fluid Dynamics (ICCFD7), Big Island, Hawaii, USA, July 9-13, 2012.
ANSYS User Guide Manual. CFX. Release 19.2. Canonsburg, PA, 2018.
Downloads
Publicado
Edição
Seção
Licença
Direitos autorais (c) 2021 Brazilian Journal of Radiation Sciences
Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.
Declaro que o presente artigo é original, não tendo sido submetido à publicação em qualquer outro periódico nacional ou internacional, quer seja em parte ou em sua totalidade. Declaro, ainda, que uma vez publicado na revista Brazilian Journal of Radiation Sciences, editada pela Sociedade Brasileira de Proteção Radiológica, o mesmo jamais será submetido por mim ou por qualquer um dos demais co-autores a qualquer outro periódico. Através deste instrumento, em meu nome e em nome dos demais co-autores, porventura existentes, cedo os direitos autorais do referido artigo à Sociedade Brasileira de Proteção Radiológica, que está autorizada a publicá-lo em meio impresso, digital, ou outro existente, sem retribuição financeira para os autores.
Licença
Os artigos do BJRS são licenciados sob uma Creative Commons Atribuição 4.0 Licença Internacional, que permite o uso, compartilhamento, adaptação, distribuição e reprodução em qualquer meio ou formato, desde que você dê o devido crédito ao (s) autor (es) original (is) e à fonte, forneça um link para a licença Creative Commons, e indique se mudanças foram feitas. As imagens ou outro material de terceiros neste artigo estão incluídos na licença Creative Commons do artigo, a menos que indicado de outra forma em uma linha de crédito para o material. Se o material não estiver incluído no licença Creative Commons do artigo e seu uso pretendido não é permitido por regulamentação legal ou excede o uso permitido, você precisará obter permissão diretamente do detentor dos direitos autorais. Para visualizar uma cópia desta licença, visite http://creativecommons.org/licenses/by/4.0/
