Effect of Mounting Orientation on Testing Equipment on Elastic Compliance of Clamped SE(T) Specimens: an exploration
DOI:
https://doi.org/10.15392/2319-0612.2022.1863Palavras-chave:
Clamped SE(T), compliance, rotation, machine stiffnessResumo
The accurate evaluation of fracture mechanics properties is key to the safety of operation of high responsibility structures such as nuclear reactor components. This paper evaluates the impact of mounting orientation on the test machine of clamped SE(T) (SE(T)c) specimens on its compliance. The elastic unloading compliance is a commonly used technique to measure the crack depth of specimens within fracture mechanics tests. Inaccurate measurements affect reliability of resulting measured properties. Two mounting orientations are evaluated in this paper together with two SE(T)c specimens with different width-to-thickness ratios (W/B=2 and W/B=4). Conclusions show that machine stiffness is significantly different in both orientations, and such value has the potential to affect crack depth prediction. On the other hand, the analysis scope of this work was unable to detect significant differences between both orientations, probably because loading was limited to maintain specimen integrity. Further investigation is necessary to precisely adress the impact of this effect.
Downloads
Referências
Andrade, L. G. F.; Donato, G. H. B. Effects of crack tunneling and plasticity on the elastic unloading compliance technique for SE(B) – current limitations and proposals. Procedia Structural Integrity, v.13, p.1908-1914.
Moreira, F. C.; Donato, G. H. B. Effects of side-grooves and 3-D geometries on compliance solutions and crack size estimations applicable to C(T), SE(B) and clamped SE(T) specimens. Proceedings of the ASME 2013 pressure vessels & piping division. Paris, France, 2013.
Cravero, S.; Ruggieri, C. Estimation Procedure of J-resistance curves for SE(T) fracture specimens using unloading compliance. Engineering Fracture Mechanics, v. 74, p.2735-2757. 2007.
American Society For Testing And Materials, 2018. ASTM E1820: Standard Test Method for Measurement of Fracture Toughness, Philadelphia.
LOSS, F. J.; GRAY, R. A.; MENKE, B. H. J integral characterization of low upper shelf A302-B steel plate. Structural integrity of water reactor pressure boundary components. Progress report ending 30 November 1977, Washington, p. 18-34, May 1978.
CRAVERO, S.; RUGGIERI, C. Estimation procedure of J-resistance curves for SE(T) fracture specimens using unloading compliance. Engineering fracture mechanics, n. 74, January 2007.
SHEN, G.; TYSON, W. R. Crack size evaluation using unloading compliance in single-specimen single-edge-notched tension fracture toughness testing. Journal of testing and evaluation, n. 37, 2009.
American Petroleum Institute, 2013. API-5L: Specification for line pipe.
Dassault Systèmes Abaqus [computer software]. 2020. Retrieved from https://www.3ds.com/products-services/simulia/products/abaqus/.
Autodesk Inventor [Computer software]. 2020. Retrieved from Figure 4: Machine stiffness estimation results.
Downloads
Publicado
Edição
Seção
Licença
Direitos autorais (c) 2022 Brazilian Journal of Radiation Sciences

Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.
Declaro que o presente artigo é original, não tendo sido submetido à publicação em qualquer outro periódico nacional ou internacional, quer seja em parte ou em sua totalidade. Declaro, ainda, que uma vez publicado na revista Brazilian Journal of Radiation Sciences, editada pela Sociedade Brasileira de Proteção Radiológica, o mesmo jamais será submetido por mim ou por qualquer um dos demais co-autores a qualquer outro periódico. Através deste instrumento, em meu nome e em nome dos demais co-autores, porventura existentes, cedo os direitos autorais do referido artigo à Sociedade Brasileira de Proteção Radiológica, que está autorizada a publicá-lo em meio impresso, digital, ou outro existente, sem retribuição financeira para os autores.
Licença
Os artigos do BJRS são licenciados sob uma Creative Commons Atribuição 4.0 Licença Internacional, que permite o uso, compartilhamento, adaptação, distribuição e reprodução em qualquer meio ou formato, desde que você dê o devido crédito ao (s) autor (es) original (is) e à fonte, forneça um link para a licença Creative Commons, e indique se mudanças foram feitas. As imagens ou outro material de terceiros neste artigo estão incluídos na licença Creative Commons do artigo, a menos que indicado de outra forma em uma linha de crédito para o material. Se o material não estiver incluído no licença Creative Commons do artigo e seu uso pretendido não é permitido por regulamentação legal ou excede o uso permitido, você precisará obter permissão diretamente do detentor dos direitos autorais. Para visualizar uma cópia desta licença, visite http://creativecommons.org/licenses/by/4.0/