Thermal hydraulic analysis of a PWR loaded with annular fuel rods

Authors

  • Wallen Ferreira De Souza UFMG- Universidade Federal De Minas Gerais
  • Maria Auxiliadora Fortini Veloso UFMG- Universidade Federal De Minas Gerais
  • Antonella Lombardi Costa UFMG- Universidade Federal De Minas Gerais
  • Clubia Pereira UFMG- Universidade Federal De Minas Gerais

DOI:

https://doi.org/10.15392/bjrs.v9i2B.1336

Keywords:

Annular fuel, Subchannel code, STHIRP, Thermal Model

Abstract

In 2006, the final report of the MIT Center for Advanced Nuclear Energy Center the project entitled High Performance Fuel Design for Next Generation PWR’s presented the proposal of an internal and external cooled ring fuel with the objective of increasing the power density of a PWR reactor without compromising the safety margins of the installation. The thermal hydraulic conditions were calculated with the aid of the VIPRE subchannel code, which is a widely used tool in the analysis of nuclear reactor cores. STHIRP-1 is a subchannel code that has been developed at the Departamento de Engenharia Nuclear /UFMG. In order to evaluate the capacity of the STHIRP-1 program, mainly in relation to the thermal model, the new fuel concept was analyzed. The results were compared with those performed with the VIPRE code presented in the reference document.

Downloads

Download data is not yet available.

Author Biographies

Wallen Ferreira De Souza, UFMG- Universidade Federal De Minas Gerais

Departamento de engenharia nuclear

Maria Auxiliadora Fortini Veloso, UFMG- Universidade Federal De Minas Gerais

Departamento de engenharia nuclear

Antonella Lombardi Costa, UFMG- Universidade Federal De Minas Gerais

Departamento de engenharia nuclear

Clubia Pereira, UFMG- Universidade Federal De Minas Gerais

Departamento de engenharia nuclear

References

Blinkov, V. N. et al. Prospects for Using Annular Fuel Elements. Thermal engeneering, Moscou Oblast, v. 57, n. 3, p. 2013-2018, 2010. ISSN 0040-6015.

Silva, R. H. M. Estudo de combustível anular para PWR. Universidade Federal de Minas Gerais. Belo Horizonte, p. 71. 2017.

Veloso, M. A. F. Análise Termofluidodinâmica de Reatores Nucleares de Pesquisa Refrigerados a Água Em Regime de Convecção Natural. Tese em Engenharia Química Sistemas de Processos Químicos e Informática-Universidade Estadual de Campinas(UNICAMP). Campinas, p. 231. 2004.

Han, K. H.; Chang, S. H. Development of a thermal-hydraulic analysis code for annular fuel assemblies. Journal Nuclear Engeenering and Design, Yuseong-gu, v. 1, n. 226, p. 267-265, Julho 2003. ISSN 0029-5493.

Shin, C.-H. et al. Thermal hydraulic performance assessment of dual-cooled annular nuclear fuel for OPR-1000. Nuclear Engineering and Design, Daedeok-Daero, v. 1, n. 243, p. 9, Dezembro 2012.

Kazimi, M. S.; Hejzlar, P. High Performance Fuel Design for Next Generation PWR's. MIT-Center for Advanced Nuclear Energy Systems. Massachusetts, p. 292. 2006.

Duderstadt, J. J.; Hamilton, L. J. Nuclear Reactor Analisys. 2ª. ed. Michigan: Jon Wiley and sons, v. I, 1976.

Downloads

Published

2021-07-25

How to Cite

De Souza, W. F., Veloso, M. A. F., Costa, A. L., & Pereira, C. (2021). Thermal hydraulic analysis of a PWR loaded with annular fuel rods. Brazilian Journal of Radiation Sciences, 9(2B (Suppl.). https://doi.org/10.15392/bjrs.v9i2B.1336

Issue

Section

XXI Meeting on Nuclear Reactor Physics and Thermal Hydraulics (XXI ENFIR) and VI ENIN

Most read articles by the same author(s)

<< < 1 2