Periodic Inspection Program of Nuclear PWR reactor Pressure Vessel

Anne Aguiar Araujo

doi:10.15392/bjrs.v8i3A.1587

Authors

Anne Aguiar Araujo Amazul - Amazônia Azul Tecnologias de Defesa S.A

DOI:

https://doi.org/10.15392/bjrs.v8i3A.1587

Keywords:

PWR Reactor, Periodic Inspection, Pressure vessel.

Abstract

This work aims to present a methodology that guides the operating organization to carry out periodic inspections in the nuclear PWR reactor pressure vessels. At first, fundamental concepts of nuclear energy and their application were discussed. This discussion allowed the presentation of: functions and characteristics of PWR reactor pressure vessels and the understanding of damage and effects of irradiation in the materials used in the manufacture of these vessels. From the recommendations of codes and publications related to pressure vessel integrity and inspections, for nuclear applications, the minimum requirements that should be considered in the inspection program preparation for this equipment were established.
Furthermore, this paper shows the advantages of using computational tools to manage inspection results allowing the operators to plan and monitor the activities for the maintenance so as to avoid financial loss and environmental damage.

Views: 136
PDF Downloads: 272

Downloads

Download data is not yet available.

References

REFERENCES

Agency’s Power Reactor Information System – PRIS – https://pris.iaea.org/pris/

PWR Power Plant Diagram, NRC – https://www.nrc.gov/reading-rm/basic-ref/students/animated-pwr.html

Curso de Introdução à Engenharia do Núcleo de Reatores, Perrotta, J.A.; Instituto de Pesquisas Energéticas e Nucleares, Apostila – São Paulo, 1999.

Integrity of Reactor Pressure Vessels in Nuclear Power Plants: Assessment of Irradiation Embrittlement Effects in Reactor Pressure Vessel Steels, nº NP-T-3.11, International Atomic Energy Agency – IAEA – Vienna, 2009.

Ensaios dos Materiais, Garcia, A., LTC – Rio de Janeiro, 2ª ed, 2012.

Fundamentals of Radiation Materials Science: Metals and Alloys, Was, G.S, Springer, 2007.

Exemplos de Áreas Inspecionadas em Vasos de Pressão de PWR, Intercontrole, http://www.intercontrole.com/EN/home-144/www-intercontrole-com-reactorpressurevessel-inspection.html

In-Service Inspection of Nuclear Facility Pressure Equipment with NonDestructive Testing Methods, Guide YVL E.5,Stuklex – Finlândia, 2014.

ASME BPVC, Seção III – Rules for Construction of Nuclear Facility

Components, Divisão I. Boiler and Pressure Vessel Code, American Society of Mechanical Engineers – EUA, 2015.

ASME BPVC, Seção XI – Rules for In-service Inspection of Nuclear Power Plant Components. Boiler and Pressure Vessel Code, American Society of Mechanical Engineers – EUA, 2015.

CNEN NE 1.25. Inspeção em Serviço em Usinas Nucleoelétricas (Resolução CNEN 13/96), CNEN-Brasil, 1996.

Advanced Approach of Reactor Pressure Vessel In-Service Inspection. Pajnić,M., Markulin, K., 10th European Conference on Non-Destructive Testing – Russia, 2010.

Reactor Concept Manual, U.S. Nuclear Regulatory Commission Technical Training Center – EUA, 2012.

Degradation Due to Neutron Embrittlement of Nuclear Vessel Steels: A Critical Review about the Current Experimental and Analytical Techniques to Characterise the Material, with Particular Emphasis on Alternative Methodologies, Nuclear Power – Control, Reliability and Human Factors, Ferreño, D., Gorrochategui, I., Gutiérrez-Solan, F., InTech, 2011.

Pressure Vessel Codes: Their Application to Nuclear Reactor Systems, Technical Reports Serie nº56, International Atomic Energy Agency – IAEA – Vienna,1966.

Guide to the Periodic Inspection of Nuclear Reactor Steel Pressure Vessels, Technical Reports Serie nº99, International Atomic Energy Agency – IAEA –Vienna,1969.