IEA-R1 Renewed Primary System Pump B1-B Nozzles Stress Analysis

Authors

  • A. A. Faloppa Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN-SP https://orcid.org/0000-0003-2930-4609
  • G. Fainer Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN
  • C. D. R. Figueiredo Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN
  • D. S. M. Carvalho Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN
  • M. Mattar Neto Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN https://orcid.org/0000-0002-2295-1021

DOI:

https://doi.org/10.15392/2319-0612.2022.1892

Keywords:

Research Reactor, IEA-R1, Pump nozzles, Finite element, Ansys

Abstract

The present report is a summary of the structural analysis of the pump nozzles applying the finite element method by using the Ansys computer program. The IEA-R1 RR is an open pool-type moderated and cooled by light water using beryllium/graphite as a reflector. The reactor can reach up to 5MW of thermal power cooled by the primary and secondary systems. The primary coolant system consists of a piping arrangement, a decay tank, two pumps, and two heat exchangers. The primary pump B1-B presented some failures requiring refurbishment by a new one. The pump used in the IEA-R1 must meet the requirements inherent to the nuclear installation, in addition to the operational requirements for rotating equipment, such as flow and pressure, and structural integrity of the body and nozzles. The supplier specified the type of pump suitable for the System. The pump furnished granted mechanical allowable loads for the nozzles that were lower than the loads imposed by the piping on the nozzles. To enable the installation of the pump in the primary circuit, new support was inserted in the piping system next to the pump minimizing efforts and deformations. A piping stress analysis was carried out to obtain the new efforts imposed on the nozzles. For validation of the motor pump set, a verification of the nozzles was done compared with API 610 standard loads, and the allowable loads of the provider. Finally, a structural analysis of the pump nozzles with the new loads was developed using the finite element method. The calculated stresses meet the limits prescribed by the ASME code; therefore, the new B1-B Pump is approved for operation at the IEA-R1 Nuclear Research Reactor primary circuit.

Downloads

Download data is not yet available.

References

BABCOCK & WILCOX Co, Instruction Book, The Babcock & Wilcox Co. – Vol. 1, 1957.

IPEN, CEN, RAS Relatório de Análise de Segurança do Reator IEA-R1, cap. 6, 1997.

FALOPPA, A. A. e FAINER, G., Análise de Tensões dos bocais da Nova Bomba B1-B do Circuito Primário do Reator IEA-R1, IPEN, CEN, IPEN-CEN-PSE-IEAR1-139-00 RELT-001-00, 2020.

FALOPPA, A. A. e FAINER, G., Avaliação Estrutural das Tubulações da Nova Bomba B1-B do Circuito Primário do Reator IEA-R1, IPEN, CEN, IPEN-CEN-PSE-IEAR1-139-00 RELT-002-00, 2020.

API - American Petroleum Institute, API Standard 610 - Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries, 2004.

ACQUA VITAE, Data Book – Bomba Centrifuga, AcquaVitae Tecnologia em Bombeamentos, 2020.

ASME - American Society of Mechanical Engineers -ASME Boiler and Pressure Vessel Code, Section II, Part D, Properties, 2007.

HEXAGON, Caesar II, Structural Analysis Guide & Theory Reference Manual, 2008.

ANSYS Inc., Ansys Mechanical R2 2021, ANSYS Inc, 2021

ASME - American Society of Mechanical Engineers - ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels, 2007.

ASME - American Society of Mechanical Engineers - ASME Boiler and Pressure Vessel Code, Section VIII, Division 2, Alternative Rules - Rules for Construction of Pressure Vessels, 2007.

HOLLINGER, G. L.; HECHMER, J. L., Phase 1 Report: Three-Dimensional Stress Criteria, PVRC Grants 89-16 and 90-13, New York, NY, 1991.

Downloads

Published

2023-01-25

How to Cite

Faloppa, A. A., Fainer, G., Figueiredo , C. D. R., Carvalho, D. S. M., & Mattar Neto, M. (2023). IEA-R1 Renewed Primary System Pump B1-B Nozzles Stress Analysis. Brazilian Journal of Radiation Sciences, 10(3A (Suppl.), 01–14. https://doi.org/10.15392/2319-0612.2022.1892

Issue

Section

INAC 2021_XXII ENFIR_VII_ENIN