CFD analysis of a wire-wrapped infinite sub-channel using temperature-dependent LBE properties

Authors

  • Ivan Keiti Umezu Departamento de Engenharia Nuclear (DEN), Universidade Federal de Minas Gerais (UFMG)
  • Antonella Lombardi Costa Departamento de Engenharia Nuclear (DEN), Universidade Federal de Minas Gerais (UFMG)
  • Dario Martin Godino Centro de Investigación de Métodos Computacionales (CIMEC), Universidad Nacional del Litoral (UNL)
  • André Augusto Campagnole dos Santos Centro de Desenvolvimento de Tecnologia Nuclear (CDTN)

DOI:

https://doi.org/10.15392/2319-0612.2022.1949

Keywords:

wire-wrapped, CFD, GCI, LBE

Abstract

Once a significant number of LMFRs (liquid-metal cooled fast nuclear reactors) employ wire-wrapped fuel assemblies, considerable attention should be directed to this engineering feature. Given the many contact points and tight gaps, wire-wrapped fuel assemblies are difficult to analyze without numerical tools, out of which CFD (computational fluid dynamic) is the leading tool in the field.  This work presents a CFD analysis of a wire-wrapped infinite sub-channel, based on MYRRHA’s fuel assembly geometry and with LBE (lead bismuth eutectic) coolant properties implemented as temperature-dependent polynomial curves. Periodic boundary conditions were applied, and the turbulence model chosen was k-w SST. All calculations were run on ANSYS Fluent R19.3. Following good engineering practices for CFD simulations, a GCI (grid convergence index) analysis was carried out, in order to ensure grid/mesh independence on the results. Ultimately, the main goal of this work was to evaluate if the implementation of temperature-dependent thermal-physical properties for LBE coolant would lead to any different results, when compared to the static properties. However, no significant result change was observed in this case, only an increase in computational time, which leads to the conclusion that for small domains with periodic boundaries, the implementation of temperature-dependent coolant properties is not justifiable.

Downloads

Download data is not yet available.

References

GEN IV International Forum, 2020 Annual Report, GIF, 2020.

OECD-NEA, Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-hydraulics and Technologies. OECD Publishing. 2015.

DE BRUYN, D.; ABDERRAHIM, H.; BAETEN, P.; FERNANDEZ, R.; VAN DEN EYNDE. G. Recent design developments of the MYRRHA ADS project in Belgium. Proceedings of ICAPP, p. 14-18, 2013.

PACIO, J.; WETZEL, T.; DOOLAARD, H.; ROELOFS, F.; VAN TICHELEN, K. Thermal-hydraulic study of the LBE-cooled fuel assembly in the MYRRHA reactor: Experiments and simulations. Nuclear Engineering and Design, v. 312, p. 327–337, 2017. DOI: https://doi.org/10.1016/j.nucengdes.2016.08.023

SHAMS, A.; ROELOFS, F.; KOMEN, E. M. J.; BAGLIETTO, E. High fidelity numerical simulations of an infinite wire-wrapped fuel assembly. Nuclear Engineering and Design, v. 335, p. 441–459, 2018. DOI: https://doi.org/10.1016/j.nucengdes.2018.06.012

DOVIZIO, D.; SHAMS, A.; ROELOFS, F. Numerical prediction of flow and heat transfer in an infinite wire-wrapped fuel assembly. Nuclear Engineering and Design, v. 349, p. 193–205, 2019. DOI: https://doi.org/10.1016/j.nucengdes.2019.04.041

LI, J.; FANG, D.; GUO, C.; WANG, M.; DENG, J.; TIAN, W.; QIU, S.; SU, G. H. Numerical Study on the Thermal Hydraulic Characteristics in a Wire-Wrapped Assembly of LFRs. Frontiers in Energy Research, v. 8, p. 1–18, 2020. DOI: https://doi.org/10.3389/fenrg.2020.548065

SHAMS, A.; ROELOFS, F.; KOMEN, E. High-fidelity numerical simulation of the flow through an infinite wire-wrapped fuel assembly. Int. Top. Meet. Nucl. React. Therm. Hydraul. 2015, NURETH 2015, v. 4, p. 2817–2829, 2015.

CELIK I. B.; GHIA, U.; ROACHE, P. J.; FREITAS, C. J.; COLEMAN, H.; RAAD, P. E. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications, J. Fluids Eng. Trans. ASME, v. 130, no. 7, p. 0780011–0780014, 2008. DOI: https://doi.org/10.1115/1.2960953

MATHUR, A.; DOOLAARD, H.; ROELOFS, F. Reduced RANS approach validation to model passive heat removal due to inter-wrapper flow. Nuclear Engineering and Design. v. 353, 110278, 2019. DOI: https://doi.org/10.1016/j.nucengdes.2019.110278

JOSHI J.B.; NAYAK, A.K. Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment. Woodhead Publishing Series in Energy. 2019

Downloads

Published

2022-10-29

How to Cite

Umezu, I. K., Lombardi Costa, A., Martin Godino, D. ., & Campagnole dos Santos, A. A. (2022). CFD analysis of a wire-wrapped infinite sub-channel using temperature-dependent LBE properties. Brazilian Journal of Radiation Sciences, 10(3A (Suppl.). https://doi.org/10.15392/2319-0612.2022.1949

Issue

Section

INAC 2021_XXII ENFIR_VII_ENIN

Most read articles by the same author(s)