Semiconductors (LEDs) quality control based in high-resolution 3D X-ray microscope

Authors

  • Diogo da Costa UERJ
  • Marcelino dos Anjos
  • Davi Oliveira
  • Alessandra Machado
  • Joaquim Assis
  • Ricardo Lopes

DOI:

https://doi.org/10.15392/2319-0612.2022.1955

Keywords:

Computed microtomography, Semiconductor integrity, LED microtomography.

Abstract

Electronic devices are getting smaller each time and the technology, increasingly complex. Commonly found problems such as reflow soldering and open solder connections, which are mostly difficult to detect by conventional means like X-ray images or physical cut on the transverse section. Along with the challenge of finding these flaws, there are also some problems that may arise on the exposure of them using destructive analysis techniques, such as the fiscal transversal cut and chemical decapsulation. Both techniques may induce damage not relevant to where that flaw is located or remove evidence of a flaw or a damaged place. The high-resolution 3D x-ray computerized microtomography provides a powerful alternative solution and non-invasive to issues that involve the analysis of semiconductor devices. This research contemplates the study of semiconductor’s integrity (LED’s) based of X-ray computerized microtomography. The SkyScan 1272 Bruker commercial equipment was used for analysis of the P-N junction in a set with 10 LEDs, under non polarized conditions and upon electrical overstress effects on its contact terminals. The P-N junction had their dimensions analyzed on the three spatial directions (x, y and z) and studied on the effects that occur when a LED is damaged. The study methodology of integrity regarding computerized microtomography have shown consist outcomes that allowed the understanding of what occurs on the LED's structure and investigates matters that allows decisions to be made regarding its quality, and so, accomplishing the goals designated on this research.

Downloads

Download data is not yet available.

References

D. A. Neamen. Semiconductor Physics and Devices: Basic Principles. 4th ed. New York, NY: McGraw-Hill, 2012. MLA (8th ed.)

Govind Nair S. J. Dhoble. The Fundamentals and Applications of Light-Emitting Diodes. 1st ed. Woodhead Publishing. 2020.

Nair, G.B., Swart, H.C., Dhoble, S.J., A review on the advancements in phosphor-converted lightemitting diodes (pc-LEDs): Phosphor synthesis, device fabrication and characterization, Progress in Materials Science 109 (2020) 100622 DOI: https://doi.org/10.1016/j.pmatsci.2019.100622

S. Voldman. Electrical Overstress (EOS): Devices Circuites and Systems, Chichester, UK: John Wiley and Sons, Ltd., 2013. DOI: https://doi.org/10.1002/9781118703328

K. Orhan. Micro-computed Tomography (micro-CT) in Medicine and Engineering. Springer Nature Switzerland AG, 2020. DOI: https://doi.org/10.1007/978-3-030-16641-0

“SKYSCAN 1272 | Bruker,” https://www.bruker.com/en/products-and-solutions/microscopes/3d-x-ray-microscopes/skyscan-1272.html (2021).

“ISee! Professional - Vision in X – Industrial Imaging - GmbH,” http://vision-in-x.com/en/isee-professional.html (2021).

Schubert, E. F., Light Emitting Diodes., 2nd ed.; Cambridge University Press: New York, 2006. DOI: https://doi.org/10.1017/CBO9780511790546

Lim, S.-R.; Schoenung, J. M. Human health and ecological toxicity potentials due to heavy metal content in waste electronic devices with flat panel displays. J. Hazard. Mater. 2009, 177, 251–259. DOI: https://doi.org/10.1016/j.jhazmat.2009.12.025

Seong-Rim, L., Kang, D., Ogunseitan, O.A. & Schoenung, J.M. (2011) Potential Environmental Impacts of Light-Emitting Diodes (LEDs): Metallic Resources, Toxicity and Hazardous Waste Classification. Environmental Science & Technology. 45:320-327. DOI: https://doi.org/10.1021/es101052q

Downloads

Published

2022-12-04

How to Cite

da Costa, D., dos Anjos, M., Oliveira, D., Machado, A., Assis, J., & Lopes, R. (2022). Semiconductors (LEDs) quality control based in high-resolution 3D X-ray microscope. Brazilian Journal of Radiation Sciences, 10(3B (Suppl.). https://doi.org/10.15392/2319-0612.2022.1955

Issue

Section

INAC 2021_XV ENAN

Most read articles by the same author(s)