Comparison of geopolymer and cement as solidification matrixes for radwaste oil treated with bentonite

Authors

DOI:

https://doi.org/10.15392/bjrs.v9i1A.1455

Keywords:

radwaste oil, cement, geopolymer

Abstract

Lubricating oils in nuclear power plants may contaminate with radionuclides and become a challenging radwaste for treatment because they decompose in storage and disposal. In addition, conventional methods of immobilization in cement should be checked. This work intends to compare cement and geopolymer used to solidify lubricating oil previously decontaminate using bentonite as sorbent material. Cement is a well-known matrix for radwaste immobilization and geopolymer (alkali-activated material) has been proposed as a new immobilization technology, due to its advantages comparing to cement and bitumen. The geopolymers are cementitious binders formed by aluminosilicates activated in alkaline medium. Synthesis occurs by means of polymerization or polycondensation reactions from the dissolution of SiO44- and AlO45- ions of the aluminosilicates in a highly alkaline solution. After the treatment of the oil radwaste, the contaminated bentonite was immobilized in geopolymer and cement matrix and the final immobilized waste properties were evaluated: compressive strength and homogeneity. The compressive strength result in cement matrix specimens (13,38 MPa) has been higher than in geopolymer matrix (5,96 MPa). Nevertheless, when the homogeneity was compared, the resultant waste in geopolymer presented an aspect more homogeneous than the in the cement matrix. The results showed that the contaminated bentonite was not distributed homogeneously in cement matrix, for this reason the cement was not adequate to solidify the simulated waste. The compressive strength result for the waste in geopolymer matrix did not meet the Brazilian waste acceptance criteria. Therefore, new compositions of geopolymer matrix using less water will be carried out to improve the compressive strength and reach the recommended by Brazilian legislations.

Downloads

Download data is not yet available.

Author Biography

  • Carolina Braccini Freire, Centro de Desenvolvimento da Tecnologia Nuclear

    Serviço de Gerência de Rejeitos

    Waste Management Seccion

References

BELANGER, R.L. "Method of removing radioactive waste from oil." Patent Number: 4615794. 1986.

CUCCIA, V.; SELES, S.R.N.; LADEIRA, A.C.Q. "Removal of cobalt from lubrificanting oil by the use of bentonite: equilibrium, kinetic and adsorption preliminary studies." Brazilian J. Radiat. Sci, v. 7, 2019.

EL-NAGGAR, M.R.; AMIN, M.; "Impact of alkali cations on properties of metakaolin and metakaolin/slag geopolymers:" Microstructures in relation to sorptionof134Cs radionuclide. J of Hazar Mat, v. 344, p. 913–924, 2018.

ANTUNES BOCA SANTA, R. A., SOARES, C., & RIELLA, H. G. Geopolymers obtained from bottom ash as source of aluminosilicate cured at room temperature. Construction and Building Materials, v. 157, p. 459–466, 2017.

DAVIDOVITS, J. 30 years of successes and failures in geopolymer applications: market trends and potential breakthroughs. In: GEOPOLYMER CONFERENCE 2002, October 28e29, Melbourne, Australia, 2002.

IAEA. "The Behaviors of Cementitious Materials in Long Term Storage and Disposal of Radioactive Waste." IAEA-TECDOC-1701. IAEA-TECDOC-1701 2013.

DRECHSLER, M.; GRAHAM, A. Geopolymers, "An Innovative Materials Technology Bringing Resource Sustainability to Construction and Mining Industries. 48TH INST. QUARR. CONF. 12, 2005.Available at: <https://doi.org/10.13140/2.1.4108.8006>Last accessed: 15April 2019.

OLAWALE, M.D., "Syntheses, Characterization and Binding Strength of Geopolymers: A Review." Int. J. Mater. Sci. Appl. v. 2, p.185, 2013.

ABDOLLAHNEJAD, Z., HLAVACEK, P., MIRALDO, S., PACHECO-TORGAL, F., AGUIAR, J.L.B. Compressive strength, microstructure and hydration products of hybrid alkaline cements. Mater. Res. v. 17, p. 829–837, 2014.

ABNT. NBR 5739. Concreto - Ensaio de compressão de corpos-de-prova cilíndricos, Associação Brasileira de Normas Técnicas, 2007.

AUGHENBAUGH, K.L.; WILLIAMSON, T.; JUENGER, M.C.G. "Critical evaluation of strength prediction methods for alkali-activated fly ash. Mater. Struct. v. 48, p. 607–620, 2015.

KOMMITSAS, K.; ZAHARAKI, D. Minerals Engineering. v 20, p. 1261, 2007.

CNEN "Critérios de aceitação para deposição de rejeitos radioativos de baixo e médio níveis de radiação." CNEN-NN-6.09 - Resolução CNEN 012/02, 2002.

Downloads

Published

2021-04-30

Issue

Section

The Meeting on Nuclear Applications (ENAN) 2019

How to Cite

Comparison of geopolymer and cement as solidification matrixes for radwaste oil treated with bentonite. Brazilian Journal of Radiation Sciences, Rio de Janeiro, Brazil, v. 9, n. 1A, 2021. DOI: 10.15392/bjrs.v9i1A.1455. Disponível em: https://bjrs.org.br/revista/index.php/REVISTA/article/view/1455.. Acesso em: 22 nov. 2024.

Similar Articles

21-30 of 54

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)