ASME in-service inspection and in-service testing programs for Angra 1

Authors

  • ANA ROSA BALIZA MAIA Eletronuclear / Central Nuclear Almirante Álvaro Alberto
  • youssef morghi Nuclear Technology Development Center (CDTN)
  • AMIR ZACARIAS MESQUITA Nuclear Technology Development Center (CDTN),

DOI:

https://doi.org/10.15392/bjrs.v8i3A.1307

Keywords:

Angra 1 NPP, inspection, ASME.

Abstract

The in-service inspection program of the Angra 1 plant is updated every 10 years, according to applicable standards - designer (American Project - are followed NRC requirements) and Cnen. NRC approves the use of ASME Section XI (In-service Inspection of Nuclear Power Plant Components). The object of in-service inspection of components in nuclear power plants is to provide a continuing assurance that they are safe. To provide this assurance for those components that are subject to the requirements of the ASME Boiler and Pressure Vessel Code, a set of rules has been formulated to provide assurance that the functional requirements of the components are available when required. The rules have been arranged to provide appropriate levels of assurance according to the importance of the component in its relationship to plant safety. The classifications that are established during design and manufacturing have been adopted to provide the levels of importance for the components. The types of components typically found in the various classifications have then been identified and rules formulated for each type. For each type of component in each classification, the functions have been considered and methods of inspecting, testing, or monitoring each component is specified. These rules include methods of determining the limits of acceptance of the results. Should it be necessary to take corrective action to repair various components, rules have been provided to establish acceptable methods of repair or replacement. Angra 1 started the Renewal License and Long-term Operation project and there are three important Aging Management Programs (AMP) that are based on ASME section XI. This article will discuss the ASME section XI subsections that are important for the License Renewal and Long-term Operation for Angra 1.

 

Downloads

Download data is not yet available.

References

COMISSÃO NACIONAL DE ENERGIA NUCLEAR, NT-CGRC-007/18 - Regulatory Requirements for Long-term Operation for Nuclear Power Plants. 2018

COMISSÃO NACIONAL DE ENERGIA NUCLEAR, NT-CGRC-008/18 - Regulatory Positions for Ageing Management in Nuclear Power Plants. 2018

U.S. NUCLEAR REGULATORY COMISSION. Requirements for Renewal of Operating Licenses for Nuclear Power Plants – 10 CFR PART 54. A vailable at: https://www.nrc.gov/reading-rm/doc-collections/cfr/part054/, Page Last Reviewed/Updated, July 19th, 2019..

U.S. NUCLEAR REGULATORY COMISSION. Standard Review Plan for Review of License Renewal Applications for Nuclear Power Plants — Final Report (NUREG-1800, Revision 2). (https://www.nrc.gov/reading-rm/doc-collections/nuregs/staff/sr1800/r2/, Page Last Reviewed/Updated, July 19th, 2019.).

U.S. NUCLEAR REGULATORY COMISSION. Generic Aging Lessons Learned (GALL) Report (NUREG-1801). Available at: https://www.nrc.gov/reading-rm/doc-collections/nuregs/staff/sr1801/, Page Last Reviewed/Updated, July 19th, 2019.

COMISSÃO NACIONAL DE ENERGIA NUCLEAR, Licenciamento de Instalações Nucleares, Norma NE 1.04.

BALIZA, Ana Rosa. “The 18 Basic Requirement of Quality Assurance for American design NPP.” 2013 International Nuclear Atlantic Conference - INAC 2013, Recife, PE, Brazil, November 24-29, 2013, Associação Brasileira de Energia Nuclear – ABEN.

International Atomic Energy Agency. - Ageing Management for Nuclear Power Plants - Safety Guide NS-G-2.12. (https://www.iaea.org/publications/8083/ageing-management-for-nuclear-power-plants, Page Last Reviewed/Updated, July 19th, 2019)

Nuclear Energy Institute. Industry Guideline For Implementing The Requirements of 10 CFR Part 54 – The License Renewal Rule - NEI 95-10 (https://www.nrc.gov/docs/ML0518/ML051860406.pdf, Page Last Reviewed/Updated, July 19th, 2019.).

U.S. NUCLEAR REGULATORY COMISSION. Codes and Standards - 10 CFR 50.55a. (https://www.nrc.gov/reading-rm/doc-collections/cfr/part050/part050-0055a.html, Page Last Reviewed/Updated, July 19th, 2019.).

COMISSÃO NACIONAL DE ENERGIA ATÔMICA, Inspeção em Serviço em Usinas Nucleoelétricas, Norma NE 1.25.

Baliza, Ana Rosa & Júnior, Jorge Armando P.. Atualização do Programa de ISI em Angra 1. (Available from:

https://www.researchgate.net/publication/287201385_ATUALIZACAO_DO_PROGRAMA_DE_ISI_EM_ANGRA_1, accessed Jul 21 2019.)

Downloads

Published

2021-02-09

Issue

Section

XXI Meeting on Nuclear Reactor Physics and Thermal Hydraulics (XXI ENFIR) and VI ENIN

How to Cite

ASME in-service inspection and in-service testing programs for Angra 1. Brazilian Journal of Radiation Sciences, Rio de Janeiro, Brazil, v. 8, n. 3A (Suppl.), 2021. DOI: 10.15392/bjrs.v8i3A.1307. Disponível em: https://bjrs.org.br/revista/index.php/REVISTA/article/view/1307.. Acesso em: 17 nov. 2024.

Similar Articles

1-10 of 335

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 > >>