Methodology for correcting the nonlinear response of radionuclide calibrators
DOI:
https://doi.org/10.15392/bjrs.v9i2.1686Keywords:
Radionuclide calibrators, Nonlinear response, Linearity.Abstract
Due to constructive and operational issues, the response of a radionuclide calibrator used in Nuclear Medicine can behave in a non-linear manner, especially in the transition of scales. Although the deviations from linearity are small, they may be important for standard secondary or reference radionuclide calibrators used in calibration laboratories. In the document TRS 454 - IAEA it is proposed that the deviation from linearity for these instruments should be in the range of ± 2%. However, calibration laboratories may have some difficulty meeting the requirement. This article proposes an easy-to-implement methodology to correct the response of reference radionuclide calibrators from calibration laboratories, in order to meet the requirement of ± 2% for the linearity parameter recommended by the IAEA.
Downloads
References
National Physical Laboratory, Protocol for establishing and maintaining the calibration of medical radionuclide calibrators and their quality control, A national measurement good practice guide NPL No. 93, 2006.
Nuclear Medicine Physics. A Handbook for Teachers and Students. IAEA Pub 1617 (2015)
International Atomic Energy Agency. Quality assurance for radioactivity measurement in nuclear medicine, TRS 454. Vienna 2006.
Applied Regression Analysis: A Research Tool, Second Edition, John O. Rawlings, Sastry G. Pantula, David A. Dickey (1998)
LNE - LNHB/CEA Table des Radionucléides. C. Morillon, M. M. Bé, V. Chechev, A. Egorov (2012)
Published
Issue
Section
License
Copyright (c) 2021 Brazilian Journal of Radiation Sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licensing: The BJRS articles are licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
How to Cite
