Modeling nuclear fuel assemblies through porous zones in a Small Modular Reactor: fluid dinamic considerations
DOI:
https://doi.org/10.15392/2319-0612.2024.2708Keywords:
Porous Zones, Fuel Assembly, SMR, CFDAbstract
This work aims to qualify the use of porous zones for representing fuel assemblies of a proposed SMR reactor in numerical models in other to reduce the computational demand required to study these structures. It employs computational fluid dynamics (CFD) methods to calculate the conservation equations of mass, momentum, and energy within a control volume. Initially, a detailed geometry of the fuel assembly was created and used for isothermal simulations. Based on the results of pressure drop and velocity, equations were used to calculate the coefficients of porosity and pressure drop of the system. These were then utilized to configure a second geometry, consisting of hexahedros divided into thirteen sub-regions according to their cross-sectional area, each having different porosities and pressure drop coefficents. Finally, the results of the two simulations were compared to verify their convergence to allow the use of the porous geometry. The outcomes suggests that, for models with a control volume significantly larger than a single fuel assembly, such as a complete nuclear reactor vessel, the use of porous zones is advantageous, as the variations in average velocity and pressure drop along the length of the structure are small, with the maximum axial velocity variation of -10.99%. However, if the objective is to conduct a more detailed analysis of the entire assembly, this strategy is not recommended, since some specific aspects of fluid behavior are not well capturated, such as radial velocity differences.
Downloads
References
[1] LIOU, Joanne. International Atomic Energy Agency. Disponível em: https://www.iaea.org/newscenter/news/what-are-small-modular-reactors-smrs. Acesso em: 19 jul. 2024.
[2] AMIN, Md Ruhul et al. A Review on the Future of SMR Reactors in Nuclear Energy. Energy and Thermofluids Engineering, v. 4, p. 17-23, 2024.
[3] HEDAYAT, Afshin. A review of advanced Small Modular Reactors (SMRs) through a developed PIRT methodology. Radiation Physics and Engineering, 2023.
[4] KANG, Seong Woo; YIM, Man-Sung. Coupled system model analysis for a small modular reactor cogeneration (combined heat and power) application. Energy, v. 262, p. 125481, 2023.
[5] MATHEW, M. D. Nuclear energy: A pathway towards mitigation of global warming. Progress in Nuclear Energy, v. 143, p. 104080, 2022.
[6] FERNÁNDEZ-ARIAS, Pablo; VERGARA, Diego; ANTÓN-SANCHO, Álvaro. Bibliometric review and technical summary of PWR small modular reactors. Energies, v. 16, n. 13, p. 5168, 2023.
[7] Simscale. Disponível em: https://www.simscale.com/docs/simwiki/cfd-computational-fluid-dynamics/what-is-cfd-computational-fluid-dynamics/. Acesso em: 25 abr. 2023.
[8] WANG, Mingjun et al. A review of CFD studies on thermal hydraulic analysis of coolant flow through fuel rod bundles in nuclear reactor. Progress in Nuclear Energy, v. 171, p. 105175, 2024.
[9] WIJESOORIYA, Kasun et al. A technical review of computational fluid dynamics (CFD) applications on wind design of tall buildings and structures: Past, present and future. Journal of Building Engineering, v. 74, p. 106828, 2023.
[10] BASRI, Ernnie Illyani; BASRI, Adi Azriff; AHMAD, Kamarul Arifin. Computational fluid dynamics analysis in biomimetics applications: a review from aerospace engineering perspective. Biomimetics, v. 8, n. 3, p. 319, 2023.
[11] CHEKIFI, Tawfiq; BOUKRAA, Moustafa. CFD applications for sensible heat storage: A comprehensive review of numerical studies. Journal of Energy Storage, v. 68, p. 107893, 2023.
[12] SANTOS, A. A. C. Investigação numérica e experimental do escoamento de água em feixe de varetas representativo de elementos combustíveis nucleares de reatores do tipo PWR. 2012. PhD Theses. Universidade Federal de Minas Gerais, Belo Horizonte, 2012.
[13] Ansys INC. Ansys CFX – Solver Theory Guide. Canonsburg & United States, 2009.
[14] HAMMAN, Kurt D.; BERRY, Ray A. A CFD simulation process for fast reactor fuel assemblies. Nuclear Engineering and Design, v. 240, n. 9, p. 2304-2312, 2010.
[15] TUSAR, Mehedi Hasan et al. Porous media model simulates thermal-hydraulics of nuclear research reactors with flat and curved plate fuel assembly. International Communications in Heat and Mass Transfer, v. 153, p. 107334, 2024.
[16] VETTORAZZI, J. L. A importância do desenvolvimento do laboratório de geração nucleoelétrica (LABGENE) para a construção do submarino de propulsão nuclear. 2007. PhD Theses. Escola Superior de Guerra, Rio de Janeiro, 2012.
[17] SINIVAL, S. N. da. Indústria da Construção e Reparação Naval. Disponível em: http://sinaval.org.br/2020/06/labgene-nuclep-recebe-visita-de-autoridades-para-conhecerem-a-fabricacao-do-bloco-40-do-reator/. Acesso em: 12 jun. 2024.
[18] KIM, K.-T. The effect of fuel rod loading speed on spacer grid spring force. Nuclear engineering and design, Elsevier, v. 240, n. 10, p. 2884–2889, 2010.
[19] YOO, Y.; KIM, K.; EOM, K.; LEE, S. Finite element analysis of the mechanical behavior of a nuclear fuel assembly spacer grid. Nuclear Engineering and Design, Elsevier, v. 352, p. 110179, 2019
[20] KING, R. A. Nuclear fuel assembly bottom nozzle plate. [S.l.]: Google Patents, 1991. US Patent 5,009,839.
[21] HERNANDEZ-AVELLANEDA, A.; JIMENEZ, G.; REY, L.; MARTINEZ-MURILLO, J. C. Modelling fuel assembly flow nozzles in a spent nuclear fuel dry cask using cfd codes. Annals of Nuclear Energy, Elsevier, v. 181, p. 109540, 2023.
[22] SANTOS, Andre AC; BARROS FILHO, Jose Afonso; NAVARRO, Moyses A. Verification and validation of a numeric procedure for flow simulation of a 2x2 PWR rod bundle. International Nuclear Atlantic Conference – INAC, 2011.
[23] NAVARRO, Moysés A.; SANTOS, André AC. Evaluation of a numeric procedure for flow simulation of a 5× 5 PWR rod bundle with a mixing vane spacer. Progress in Nuclear Energy, v. 53, n. 8, p. 1190-1196, 2011.
[24] SCHWER, L. American Society of Mechanical Engineers. ASME V&V 20 - Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer. New York, 2009.
[25] FOX, R. W.; MCDONALD, A. T.; PRITCHARD, P. J. Introduction to Fluid Mechanics. Hoboken, NJ, US: John Wiley & Sons, 1998. p. 235.
[26] CASTRO, H. F. P. Avaliação termo-hidráulica experimental de grades espaçadoras comerciais para reatores PWR e de protótipo fabricado por impressora 3D. 2020. PhD Theses. Universidade Federal de Minas Gerais, Belo Horizonte, 2020.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2025 Rebeca Cabral Gonçalves, Geovana Carvalho Silva, Fernando Lage Araújo Schweizer, Pedro Andrade Maia Vinhas, Keferson de Almeida Carvalho, Tiago Augusto Santiago Vieira, Vitor Vasconcelos Araújo Silva, Graiciany de Paula Barros, Andre Augusto Campagnole dos Santos
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licensing: The BJRS articles are licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
