Simplified CFD model of coolant channels typical of a plate-type fuel element: an exhaustive verification of the simulations

Javier González Mantecón; Miguel Mattar Neto

doi:10.15392/bjrs.v7i2B.621

Authors

Javier González Mantecón Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP)
Miguel Mattar Neto Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP)

DOI:

https://doi.org/10.15392/bjrs.v7i2B.621

Keywords:

flat-plate fuel assembly, research reactor, Computational Fluid Dynamics, Grid Convergence Index

Abstract

The use of parallel plate-type fuel assemblies is common in nuclear research reactors. One of the main problems of this fuel element configuration is the hydroelastic instability of the plates caused by the high flow velocities. The current work is focused on the hydrodynamic characterization of coolant channels typical of a flat-plate fuel element, using a numerical model developed with the commercial code ANSYS CFX. Numerical results are compared to accurate analytical solutions, considering two turbulence models and three different fluid meshes. For this study, the results demonstrated that the most suitable turbulence model is the k-e model. The discretization error is estimated using the Grid Convergence Index method. Despite its simplicity, this model generates precise flow predictions.

Downloads

Download data is not yet available.

Author Biographies

Javier González Mantecón, Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP)

Nuclear Engineering Center, Full-time PhD Student
Miguel Mattar Neto, Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP)

Nuclear Engineering Center, Senior Technologist

References

MILLER, D. R. Critical flow velocities for collapse of reactor parallel-plate fuel assemblies. J. Eng. Power, v. 82, p. 83–91, 1960.

STROMQUIST, W. K.; SISMAN, O. High Flux Reactor fuel assemblies vibration and water flow. ORNL-50, Oak Ridge, 1948, 55p.

DOAN, R. L. The engineering test reactor - a status report. Nucleonics, v. 16, 1958.

SMISSAERT, G. E. Static and dynamic hydroelastic instabilities in MTR-type fuel elements Part I. Introduction and experimental investigation. Nucl. Eng. Des., v. 7, p. 535–546, 1968.

SMISSAERT, G. E. Static and dynamic hydroelastic instabilities in MTR-type fuel elements Part II. Theoretical investigation and discussion. Nucl. Eng. Des., v. 9, p. 105–122, 1969.

GUO, C. Q.; PAIDOUSSIS, M. P. Stability of Rectangular Plates with Free Side-Edges in Two-Dimensional Inviscid Channel Flow. J. Appl. Mech., v. 67, p. 171–176, 2000.

LI, Y.; LU, D.; ZHANG, P.; LIU, L. Experimental investigation on fluid-structure interaction phenomenon caused by the flow through double-plate structure in a narrow channel. Nucl. Eng. Des., v. 248, p. 66–71, 2012.

HOWARD, T. K.; MARCUM, W. R.; JONES, W. F. A novel approach to modeling plate de-formations in fluid-structure interactions. Nucl. Eng. Des., v. 293, p. 1–15, 2015.

CURTIS, F. G.; EKICI, K.; FREELS, J. D. Fluid-Structure Interaction for coolant flow in re-search-type nuclear reactors, In: COMSOL CONFERENCE, 2011, Boston, 2011.

KENNEDY, J. C.; SOLBREKKEN, G. L. Coupled Fluid Structure Interaction (FSI) modeling of parallel plate assemblies, In: PROCEEDINGS OF THE ASME 2011 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS & EXPOSITION, 2011, Denver: American Society of Mechanical Engineers, 2011.

BODEY, I. T.; CURTIS, F. G.; TRAVIS, A. R., ARIMILLI, R. V; FREELS, J. D. Research and development of multiphysics models in support of the conversion of the High Flux Isotope Reactor to low enriched uranium fuel. ORNL/TM-2015/656, Oak Ridge, 2015, 227p.

SALIM, S. M.; CHEAH, S. C. Wall y+ strategy for dealing with wall-bounded turbulent flows, In: PROCEEDINGS OF THE INTERNATIONAL MULTICONFERENCE OF ENGINEERS AND COMPUTER SCIENTISTS, 2009, Hong Kong, 2009. p. 1–6.

OBERKAMPF, W. L.; ROY, C. J. Verification and validation in scientific computing. New York: Cambridge University Press, 2010.

EÇA, L.; HOEKSTRA, M. A procedure for the estimation of the numerical uncertainty of CFD calculations based on grid refinement studies. J. Comput. Phys., v. 262, p. 104–130, 2014.

ROACHE, P. J. Verification and validation in computational science and engineering. Al-buquerque: Hermosa Publishers, 1998.

ANSYS Inc. ANSYS CFX Documentation, Release 18. Canonsburg, 2016.

WHITE, F. M. Fluid Mechanics, 7th ed. New York: McGraw-Hill, 2011.

CELIK, I. B.; GHIA, U.; ROACHE, P. J.; FREITAS, C. J.; COLEMAN, H.; RAAD, P. E. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications. J. Fluids Eng., v. 130, p. 1–4, 2008.

RICHARDSON, L. F. The approximate arithmetical solution by finite differences of physical problems involving differential equations, with an application to the stresses in a masonry dam. Philos. Trans. R. Soc. A, v. 210, p. 307–357, 1911.

INVAP, Brazilian Multipurpose Reactor project - core thermal-hydraulic design in forced convection, RMBP-0130-2IIIN-005-A, 2013, 18p.

STERN, F.; WILSON, R. V.; COLEMAN, H. W.; PATERSON, E. G. Comprehensive ap-proach to verification and validation of CFD simulations - Part 1: methodology and procedures. J. Fluids Eng., v. 123, p. 793–802, 2001.

ANDERSON, J. D.; DEGROOTE, J.; DEGREZ, G.; DICK, E.; GRUNDMANN, R.;VIERENDEELS, J. Computational Fluid Dynamics: An Introduction, 3rd ed. Berlin: Springer, 2009.